Complete line of temporary protective peelable coatings, liquid mask provides temporary protection or long term preservation. Applied as a liquid by spray, roller or brush, these coatings dry to form a skin- tight plastic film which can simply be peeled away when required, without damage to the substrate surface.
High temperature protective peelable coating cures to form a contour - hugging skin tight protective film on metals, glass or ceramics. This film is extremely useful in protecting items from overspray, dirt, etc., which undergoes high temperature cycles up to 180°c for 1 hour. For instance: metal hooks holding object to be painted become over sprayed. Solution: apply high temperature coating on the hooks and after a few cycles of spray the film with the over spray paint can be peeled and the hooks are clean for further use. It can be applied with a brush, roller, dip or airless spray. The cure is upon water evaporation to a transparent blue coating. It is recommended to coat between 50 microns to 150 microns dry film depending on the application.
Booth coat is a temporary clear peelable coating for paint spray-booth walls, ceilings, floors and other surfaces where paint over spray accumulation must be readily removed. Booth coat can be used as a peelable coating on steel surfaces to eliminate flash rusting or as protection on glass, Plexiglas, rubber, cement, aluminum and many other hard surfaces.
Floor Peel is a temporary Protective Floor coating formulated for maintenance of industrial floors. It protects floors form build-up of inks, spray track adhesives, paint tracks, lint, grease and grime. When it is time to clean, just peel it up.
Designed especially for floors, it has built in traction allowing you to walk on it and avoid slippage and durable to handle heavy forklift and foot traffic. Perfect for floor areas around presses, spray areas, high traffic routes. IT CAN BE APPLIED ONLY ON NON PORUS SURFACES AND RECOMMENDED APPLICATION IS 100 TO 150 MICRONS DRY FILM THICKNESS.
PAINT SHEILD is an easy to apply, strippable coating to protect substrates from scratching and marring. It can be applied by spraying or dipping. Paint Shield is a clear peelable coating and forms water resistant when dried. It may also be used to protect various types of surfaces. Paint Shield air-dries and also drying process can be expedited by mechanical means, leaving a tough, yet flexible coating that is easily removed from a variety of surfaces.
Phosphorescent glow in the dark liquid peelable masking compounds, are a new type of light excited luminance material. These glowing materials can absorb and store energy of various ultraviolet and visible light spectrums, and release that energy in the form of bright light and glow in Dark environments.STORAGE: 18℃ TO 35℃
|Liquid Masking Coating Coverage Chart|
|Dry Film Coating micron||50||75||100|
|Square Feet of Coverage/K.G||65||42||13|
Metalprotect_5000 is water based Peelable coating for protecting parts during shipment, storage and in transit. 5000 is very easy to apply strippable coating for the protection of substrates from scratching and marring . 5000 is useful for substrate protection during polishing, handling and long term storage.
Available in transparent or solid colors, these attractive coatings not only protect, but are useful in product identification and inventory control. Numbers and information can easily be seen through the transparent coatings. Metalprotect_5000 protects items from rust and cushions items during handling, storage, and shipping. When it's time to use the item, just peel off the coating.
5000 represents the ultimate in water-based removable coating technology. It is stabilized against brittleness and is not softened or penetrated by most water-based compounds.
All rights reserved | Adhesive Specialities. Avanzar Business Solutions